GN new designed
dewatering unit for our client is customized design according to client’s
particular project. We ever sold decanter centrifuges to a lot of clients for
their dewatering system, but we did not provide the complete system design.
The whole system is
devided into 3 parts: Part one solids
control or called solids removal, part two dewatering unit, part three
storage systems.
Part 1: Solids
removal:
Double deck shale shaker
GNZS706E-HB and mud cleaner GNZJ703E-3S
This part is to
separate the big solids from the drilling fluids and less the solids content,
so the fine solids will remain in the drilling fluids and be pumped to the
dewatering unit.
Part 2: dewatering
unit
This part is to add
chemical powder into the drilling fluids for flocculation,
then use the cutting machine to cut the big solids into small pieces, then use
the screw pump to transfer to GN big bowl decanter
centrifuge GNLW553VFD to separate the solids from water. Because water
conservation has been a public concerned issue in the world, this dewatering
unit has the functions below:
1)
Keep the drilling fluids balance by weight for
better performance during drilling
2)
Less tank bottom for easy cleaning
3)
Less the cost for treating the water based
drilling fluids
4)
Get more clean water for reuse or conservation
Part 3: storage of
clean drilling fluids
These drilling fluids
can be reused for drilling by mixing some chemicals.
Advantage of GN
designed dewatering Unit:
1 Easy
transportation: The equipments are fixed into a 20ft container size frame, so
you can put it on the standard truck.
2 Suitable for both
cold weather and hot weather: All the units are equipped into the 40ft
container, which is rain proof, there is conditioner or fan inside the
container to keep it cool. If you operate it in cold weather like Russia, you
can close the door of the container.
For more info for this dewatering system, pls contact
GN sales(http://www.gnsolidsamerica.com).
Related Article:
No comments:
Post a Comment