GN Solids Control’s products naming rules

GN Solids Control is a world famous company and brand in the solids control and drilling waste management industry. Now its business range spanning from shale shakers, mud cleaners, decanter centrifuge, cutting dryer, vacuum degasser and so on. GN could be your one stop shop in the solids control and waste management area. Its product application covers from oil and gas drilling, HDD and CBM drilling, bored pile and TBM drilling.

Today I will introduce two naming rules to you, the vacuum degasser and decanter centrifuge. For the vacuum degasser GNZCQ360A, GN means the company name, ZCQ means the equipment is with a vacuum pump to help separate the mud and gas, 360 means the processing capacity is 360 cubic meter per hour. A means it’s the first generation and later we will upgrade it periodically as technology improves.

For the decanter centrifuge GNLW363CG-VFD, GN means the company name, LW means it is horizontal axled centrifuge, 363 mean the centrifuge’s diameter is 360 mm, and the ratio of the length and diameter of the bowl is 3, C means it is the third generation of the machine, G means it is high configuration with many super features, such as the bowl is made from duplex stainless steel 2205 by centrifugal casting, there is tungsten carbide tiles on the surface of screw for longer life, the bearings are made by SKF, the screw flow distribution port and bowl solid discharging port are protected by ceramic insert and so on. So more and more customers like this high configuration cause it’s more reliable and rugged. VFD means variable frequency drive, this feature can make it providing consistent and effective solids control in a wide range of drilling fluid types and drilling conditions. This automated control system can adjust bowl and conveyor speed as well as the feed rate to optimize it for the most efficient solid control in a wide range of drilling applications.

That’s the basic introduction of the naming rules for vacuum degasser and decanter centrifuge. Hopefully it will be useful to you.We will try our best to assist your business to be successful. Welcome to visit www.gnsolidsamerica.com and please send your inquiries to USA@gnsolidscontrol.com

GN Solids America LLC's drilling fluid management during the winter cold weather

The installation of solids control drilling mud cleaning system to meet the oil well drilling requirement in different stage of well drilling. The drilling fluid tanks mixer, butterfly valves need to be easy to use.

Base on the provisions of the garbage pit dug well, the size of garbage pit cannot be smaller than requirements of the design.

To make sure the safety of operators, it needs adjusting calibration of rotation direction of the motors that connected to the spindle flange ring. The start use of desander and desilter, and the drilling fluid decanter centrifuge before pre-heating of steam pumps and the pipelines.

The circulation of the drilling fluid, it reserves and distribution system work of insulation.

The ground measurement, maintenance and the handling to ensure the stability of performance of drilling fluid is base on strict implementation of the design of drilling fluid program that strengthen the daily management of the drilling fluid.  

The slurry and bentonite must be pre-hydration of 24 hours.

The filtrate loss reducer and plugging agent to add amount to be enough to maintain the stability of the borehole by increase the drilling fluid input. 

The personals that work on drilling fluid recycle system need to be increase compare with the drilling operation in the summer time by use mud scraper, blowout prevention box to reduce the waste.

Make sure strengthen the drilling fluid material reserves and management works, the reserves should be sufficient to prepare more than 50 cubic meters of drilling fluid.

The timely manner to remove the drilling cuttings in both desander and desilter cones to make sure that the conical tank liquid discharge port clearance.

To complete testing variety of drilling fluid equipments ensure ease of use for drilling mud recycling system operators.

GN Solids America LLC's drilling mud cleaning system export to more than 60 countries where operation weather can be both extreme hot like Middle-East region and extreme cold region like Russia and in both extreme condition, the mud recycle system is operational like normal.