4-tank mud system for 750hp drilling computer

GN Solids Control is really a worldwide famous brand of mud solids control system, drilling waste management system, and also replacement shaker screens.

Soon, GN Solids Control Cina factory finished a mud system for a domestic job. It is a 4-tank mud system for 750hp drilling rigs.
1) The 4 mud tanks of the 750hp drilling mud system are the same sizing with 40ft container. And also the tanks are equipped with 3-runner oilfield skid. The oilfield skid is with 250mm at each tank ends. It makes the aquariums easy to movement at jobsites.
2) GN Solids Control equips 2 sets Solids control linear motion shale shaker separator for the system. The system is equipped with only two each 3-panel shale shaker, model GNZS703E. It is the hottest shaker models for coal and oil mud system from GN Solids Control.

3) Within this system, the clients pick 1 desander separator plus a desiler separator.
The desander model is GNZJ752-2S. Its equipped with 2 ea 10’’ desander cone. Each 10’’ desander cone is with greatest extent. 120 m3/h (528GPM) managing capacity.
The desilter cone model is GNZJ752-12N. It truly is equipped with 12 ea 4’’ desilter cone. Each 4’’ desilter cone is with utmost. 20 m3/h (88GPM) managing capacity. For totally 16 ea 4’’ desilter cone, the desilter handling ability can reach to 240m3/h (1056GPM).
4) The 4-tank mud system is equipped with some sort of middle speed decanter centrifuge to recovery the barite and reduces the mud weight. The centrifuge product is GNLW452. It is a the majority of cost-effective big bowl decanter centrifuge widely used in solids control mud systems intended for oil rigs.
5) As well as many mud agitators, mud guns, lights, and sends for the system.
6) This kind of clients choose a separate plane mud mixing system. Typically the jet mud mixing hopper and mixing pump along with control panel are all attached in a separate oil discipline design skid. It is easy to shift it and work to several mud tank systems.