Meaning of Coupling for
solids control rotating equipment
Coupling for solids control rotating
devices are utilized for the bond of two axes (the driving shaft and also the
driven shaft), allow the 2 axis rotating together and also to transfer torque.
Within the transmission of high-speed and high load rotating system, the
coupling have purpose of buffer, damping and enhance the dynamic performance
from the shaft. Coupling includes two parts, correspondingly associated with
the driving shaft and driven shaft. The majority of the general energy machine
by way of coupling using the work machine connected.
Solids control equipment with coupling
design
Normally, the rotating speed with shaft or
axis will require Coupling, like
1) Mud agitator: It's lower speed rotating equipment. Normally,
the rate is just around 60 or 70 revolutions per minute. It's use to agitating
the drilling liquids in tank and eliminates the mud from settle lower. Per
different tank inner dimension, the mud agitator motor energy differs from
5.5hp ~30hp. In some instances, to be able to have more compact design, coupler
may also be not used.
2) High-speed/low speed decanter centrifuge:
It's high-speed rotating equipment with speed around ~4000 revolutions per
minute. Decanter centrifuge is use high-speed to create high G pressure, and utilize
our prime G pressure to split up the fine solids from drilling liquids. Is
dependent on several centrifuge model, the separation point is between 2~5
microns or 5~7 microns.
3) Different model pumps: centrifugal pump,
submersible slurry pump, screw pump, and so forth.
4) Screw conveyer for drilling cuttings
transfer.
Along with other rotating equipment.
Classification of coupling for solids
control rotating equipment
You will find many different types of
coupling use for solids control rotating equipment, here is the standard model
be utilized.
1) Flexible coupling
2) Teeth-shaft coupling
3) Universal Joint
4) Star formed elastic coupling
5) Plum formed elastic coupling
6) Pin coupling with elastic sleeve
Related Arciels:
No comments:
Post a Comment