Welcome to meet with GN in CIPPE at booth E2200

With a nice begining of 2016, welcome to pay a visit to GN in CIPPE, snabel-a booth E2200. Details seeing that below:
Address: New The far east International Exhibition Center, Beijing; No . 88, Yuxiang Route, Tianzhu, Shunyi District, Beijing
Event Time: March 29-31, 2016
GN Booth Number: HALL E2 -E2200, presentation area area 272m2.
Booth Area: http://public.cippe.com.cn/static/hall/2016bj/hall_e2.jpg
Appointment Email: sales@gnsolidscontrol. com
GN Factory Place: 40KM to the Exhibition Centre (40 Minutes Drive)
Along with prediction on the market development, GN have made several big actions before other solids control suppliers. No matter GN is often a leader on this or not, GN have been the first, the leader for a lot of things. Been the initial API certified company, the 1st solids control supplier possess office & wearhouse with Houston, the first one have competent verticle cuttings dryer intended for waste mangament, the first one supply by china manufacturer who supplied waste management equipment to Baker Barnes. Also if only comparing the marketplace for oversea from China, GN must be the biggest one. Right after exported to over 60 nations, have been known by a lot more customers, engineers, and getting worldwide reputation.

Before men and women told us that we researched, and found you, then currently all new customers told us all, we are recommended by many reliable engineers, friends.
This is visit GN booth as well as check the products by yourself. Discovering is beliving, that is anything you always say, as easy to discover the production capacity, and if a number of manufacuturer is ready for your own order, for big orders not really. The facility is good or ready enough for production acturate equipment, suppliers great / qualified enough with regard to higher tech equipment.
In conclusion, Meet with GN people, and pay attention to the reason you can work with GN.

Cost-effective Shale Shaker Screen for Sale 20-30% Off

Shaker Screen is among the very often uses wear areas for drilling process. While starting the drilling method, the shaker screen will be installed on the shale shaker unit to separate the reliable particles in drilling water. The fine holes in screen panel could mass the solids larger than the opening size, while the liquid could possibly go through easily. On olive oil field, most of the shale shaker unit is using 3 or 4 panel screens. According to different condition of the actual drilling fluids and utilization, the driller need generate inventory of the spare shaker screen.
It will be good to obtain the shale shaker screen from the first shale shaker supplier once are willing to spend much cash on it. There is another way to find the replacement screen from the OEC screen manufacturer. This would spend less a lot on the cost of save screens, so that the drilling price would be greatly reduced.
GN Solids Control, definitely, is one of the companies of the shaker screens. Having nearly 10 years experience that manufactures the solids control gear and shaker screens, GN now could provide the substitution shaker screen for Derrick FLC 500 and 48-30 series, replacement screen intended for Swaco Mongoose and ALC series. No matter hook deprive or frame type, pre-tensioned or non-pretensioned. Many beneficial onsite level performance reactions proved the GN’s screen quality.

It is well known GN is a manufacturer who is maintaining improving the technology. Right after several years’ research in addition to kindly feedbacks from client, GN has improved typically the technology on shaker screen fabrication, which greatly enhances the shaker screen life time and minimize the processing cost. This kind of directly leads to the decrease of the screen price. GN is willing to share the power with all the clients by offered the full line screens using a 20-30% unit price lowering. That is really good news for your shaker screen requester.
GN is also able to provide the alternative shaker screen used on Cobra shaker, VSM300 shaker as well as FSI shakers. Besides, GN’s does have the screens with regard to own shale shaker product. If you have any request within the shaker screen, just contact us to get more information.

Cycle of cleaning for the drilling fluid

Concept: The cleaning cycle of drilling fluid is to remove the harmful solid debris, reserve the clean drilling fluid to meet the demand of drilling fluid spec under the drilling process. Drilling fluid cleaning system is the term of all drilling fluid solids control equipments used in the oil drilling.

Function: To prevent the oil well from clogging, breaking, and decrease the drilling torque and friction resistance, reduce the pressure fluctuations of the empty suction, increase the drilling speed, extend the drilling bit life of use, and reduce wear and tear of the equipments.

Methods: The usual methods are mixture-thin methods, swap methods, machine methods and additive-chemical methods. Use different separation function machinery is  machine method is by using screening, centrifugal separation and gravity separation to separate the solid phase according to the different size and density, therefore, to control the solid phase in the drilling fluid.

1 The technical process of the drilling fluid cleaning system and the combination of the fluid cleaning equipment.

The technical process of complete group of drilling fluid cleaning system should meet the specification of five level solid phase control (screening, degassing, desanding, desilting, centrifuge) and the provoke the drilling fluid. The merger of each solids control equipment is very important, the through out of one to five level of mud cleaning equipment should each work with each other, and the spacing of the proper distance were is appropriate.  To have certain repeating cleaning during the cleaning process, make the smaller particles of the processing incomplete in the up one had been disposed in the next solids control equipment.

2 Drilling fluid cleaning cycles

The mud back from the opening of well through the pipeline and conveyed the drilling fluid to the shale shaker. The first phase of cleaning completed by shale shaker, then entered the mud tank, the drilling fluid flowed from the mud tank through the tank slot into the desander and desilter (if detect the present of gas, vacuum degasser will process to remove the gas) the fluid after processing of the centrifugal steps and through the tank slot enters the inhalation cabin.  The cleaned fluid then will reuse for lubricate and cooling the drill bit. 

GN Closed Loop Zero Release System

As the restrictions with regard to dispose the drilling waste material from the oil and gas drilling is now more and more strict all over the world, particularly in developed countries and regions, the drilling companies as well as the oil related service businesses are more and more careful in disconnection with the drilling waste. It may be a trend that so-called zero discharged solutions is required for the oil and gas drilling market.
Among all the solids control and waste management producers in China, GN Solids Control is the first to create and develop the zero-discharged closed loop for treating the actual drilling cuttings. See specifics as below:
1 . GN complete solids control system including GN shale shaker, GN mud cleaner, GN middle speed decanter centrifuge and GN high speed decanter centrifuge. all drilling cuttings discharged from above mentioned products are collected by GNSC series screw conveyor for even more treatment instead of disposed.

installment payments on your GN drilling cuttings squander management system, it is useful for further treat the drilling cuttings. because the drilling cuttings from the solids control system are still wet. This system includes GNZS594HGE-LD drying shakers and GNLW363CG high speed decanter centrifuge for WBM solely. Or, GNCD930C vertical cuttings dryer and GNLW363CG Decanter centrifuge for both WBM and OBM.
The above mentioned two systems are enough for the majority of cases.
3. GN Dewatering unit and high speed dewatering centrifuge GNLW363CG-VFD. Dewatering product is a system for foloculating the extra fine particles in to larger ones in order to be connectors by the high speed decanter centrifuge. Like the item 2 is approximately the further treating with regard to drilling cuttings, the dewatering unit is for further healing the liquid.
4. GN Solidification unit and TDU Unit are respectively utilized for finally dispose the very well dried drilling cuttings in the drilling cuttings waste management system.

GN After Sales Commissioning Service in Nigeria for 33 Sets Drilling Waste Management Equipment

Hebei GN Solids Control Co., Ltd is a major manufacturer of drilling waste management equipment in China and taiwan and is the first one having produced the core equipment usable cutting dryer in China and taiwan. With the mature technology, good quality and cost effective price, GN Vertical Cutting Dryer is starting to become more and more popular in the world, as well as gradually being accepted by means of big players in oilfield such as the Baker Hughes. Product now, we have already shipped nine sets of drilling waste management equipment along with system to Russia, and as well one to Cyprus, over 30 sets drilling waste management equipment to Africa. Currently GN after sales team has been performing the commissioning service with Nigeria. Here we are very happy to share this info and several photos on the site.

The total 30 three sets of going waste management equipment contains 3 sets vertical cuttings dryer, 6 sets high speed VFD decanter centrifuges, 9 twist pumps, with 6 with regard to feeding decanter centrifuges , three other three for flushing the cuttings dryer and 15 mess conveyors for transfer going waste to feed the tools and discharge the solids. All these equipment is for three drilling rigs. This client is actually a one of the biggest drilling contractors with Nigeria, and we have established business model with him for over some years. And this is the third purchase before which the client was already purchased a mud herb and also 4 sets decanter centrifuges. With long term assistance with GN and fantastic trust and support for you to GN Solids Control high quality products, we are going to get more and more orders through thjs client. Also each of our after sales team is efficiently doing the commission service on the webpage to make sure that the client can work all the equipment safely and appropriately.

GN Shear Pump in Mud Recycling System

All large capacity drilling projects such as oil propane drilling, no dig drilling for pipeline laying along with water well drilling want drilling fluids when doing the actual drilling job. There is 1 type equipment naming shear pump that is an ideal option for drilling fluids mixing. We could see the drilling water as the blood of the drilling equipment.
Here, how to make the particular drilling blood clean and then let the blood perform well is so crucial to all the drillers. It is identified that the drilling project have to have a drilling fluids recycling system, or we call that mud recycling system. Just before start drilling, we need have the mud recycling system prepared. On the other hand, we need the drilling fluids to be ready. Often the drilling fluid is a mix off water/oil and some mud elements like barite, bentonite, plus some other chemical agents. Among the list of various mud materials, often the bentonite is the most important just one and the consumption is quite significant. Meanwhile, the bentonite is a polymer which is difficult to resolve into the drilling mud bottom. Then how should all of us resolve this problem? Bingo! We want a shear pump. On account of the special design of often the impeller, the shear pump could cut the polymer bonded into very small pieces to ensure these materials could resolve into the water easily. An increased efficiency shear pump will certainly make the consumption of bentonite reduce a third. Oh my god! Excellent large cost saving.
It is not the only advantage to use a shear pump to cut the polymers. Once the drilling started, often the solids control equipment will start running. When the utilized drilling fluid comes out from well whole and circulation into the shale shaker, the actual mud recycling process is definitely beginning. If there is much longer strips material in the going fluids, the screen are going to be blocked which leads to decrease of polymers.

One thing the going fluids engineers need give consideration is the shear pump are unable to run without fluids in the pump. As you know, the shear pump is use centrifugal type pump, it have to have run with liquid to lower centrifugal force so that the essential fluids can be transferred continuously. Another, the shear pump should not be used to transfer used/active mud, as the cuttings in the utilized mud will definitely damage the particular pump parts.

GN Solids Control products are widely used in both overseas and domestic market.

GN Solids Control equipemnt are widely used in both overseas market place and domestic market. Many of us target on high end solution and commit ourselves to supply most user friendly design in addition to service. In domestic industry, Hongkong is one of the most important components.
2011, we export 2 sets of shield drilling mud recycling system for you to HongKong.
2014, we foreign trade one set of compact mud system for offshore drilling to HongKong.
2015, end of this 12 months, we export a number of shale shaker & mud cleaner to HongKong solids control project.
Why choose GN? What is the GN advantages in comparison with other China supplier?
1) Longer lifetime from corporation foundation
GN Solids Control have over 8 decades experience for solids control equipment design, production, product sales and service. Our Key engineer have over two decades experience in solids control equipment operation and maintenance. All of our product already launch within market for many years, the trustworthy working performance and fine design win client’s popularity and good reputation.

2) Product ongoing update
Most of us collect suggestions from various clients and we learn from a lot of big projects. GN Solids Control equipment is upgraded effectively to overcome the flaws found in operation. Like centrifuge, we upgrade to D version, GNLW363CG centrifuge is GN 3rd generation premium centrifuge. The product model is showing reliable working performance, possibly comparing with US brand item / Europe brand merchandise.
3) Rich experience in working with big project in prior years.
Eg.
Over 30th sets decanter centrifuge regarding Egypt Market
Over 30th sets decanter centrifuge along with over 20 sets Excessive G dryer for Midst East Client
Over something like 20 sets decanter centrifuge with regard to Brazil Market
Over thirty sets decanter centrifuge regarding Argentina market
……
Should you be International oil service company or solids control service company or mud chemicals engineering corporation, and if you require large quantity connected with solids control equipment, please contact us freely. We will last in professional way with accumulated rich experience throughout big project.
4) Foreign base to give better in order to surrounding clients.
a. GN Solids America LLC
GN Solids Control is the first solids control company set base as well as branch office in US. Our USA base is actually ongoing operation from 2013.